S. Kochupurackal Rajan, A. Kaul, T Sarvey, G. S. May, and M. S. Bakir, "Design Considerations, Demonstration, and Benchmarking of Silicon Micro-cold Plate and Monolithic Microfluidic Cooling for 2.5D ICs," 71st IEEE Electronic Components and Technology Conf. (ECTC),  Jun. 2021.

S. Kochupurackal Rajan, A. Kaul, T. E. Sarvey, G. S. May and M. S. Bakir, "Monolithic Microfluidic Cooling of a Heterogeneous 2.5-D FPGA With Low-Profile 3-D Printed Manifolds," in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 11, no. 6, pp. 974-982, June 2021.

T. E. Sarvey, A. Kaul, S. K. Rajan, A. Dasu, R. Gutala, and M. S. Bakir, "Microfluidic Cooling of a 14-nm 2.5-D FPGA With 3-D Printed Manifolds for High-Density Computing: Design Considerations, Fabrication, and Electrical Characterization," IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 9, no. 12, pp. 2393-2403, 2019.

M. H. Nasr, C. E. Green, P. A. Kottke, X. Zhang, T. E. Sarvey, Y. K. Joshi, M. S. Bakir, A. G. Fedorov, "Flow regimes and convective heat transfer of refrigerant flow boiling in ultra-small clearance microgaps," Inter. Jour. of Heat and Mass Transfer, Volume 108, Part B, Pages 1702-1713, 2017.

T. E. Sarvey, Y. Hu, C. E. Green, P. A. Kottke, D. C. Woodrum, Y. K. Joshi, A. G. Fedorov, S. K. Sitaraman, and M. S. Bakir, "Integrated circuit cooling using heterogeneous micropin-fin arrays for nonuniform power maps," IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 7, no. 10, pp. 1617-1624, Oct.2017

T. E. Sarvey, Y. Zhang, C. Cheung, R. Gutala. A. Rahman, A. Dasu, and M. S. Bakir, "Monolithic integration of a micropin-fin heat sink in a 28 nm FPGA," IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 7, no. 9, pp. 1465-1475, Sep. 2017.

Y. Zhang, T. E. Sarvey, and M. S. Bakir, "Thermal evaluation of 2.5-D integration using bridge-chip technology challenges and opportunities", IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 7, no. 7, pp. 1101 - 1110, July 2017.

 W. Wahby, T. E. Sarvey, H. Sharma, H. Esmaeilzadeh, and M. S. Bakir, "The impact of 3D stacking on GPU-accelerated deep neural networks an experimental study," in Proc. IEEE Int. 3D Systems Integration Conf. (3DIC), San Francisco, CA, Nov. 2016.

D. Lorenzini, C. Green, T. E. Sarvey, X. Zhang, Y. Hu, A. G. Fedorov, M. S. Bakir, Y. Joshi, "Embedded single phase microfluidic thermal management for non-uniform heating and hotspots using microgaps with variable pin fin clustering," Inter. Jour. of Heat and Mass Transfer, Volume 103, Pages 1359-1370, 2016.

Y. Zhang, T. E. Sarvey, Y. Zhang, M. Zia and M. S. Bakir, "Numerical and experimental exploration of thermal isolation in 3D systems using air gap and mechanically flexible interconnects," in IEEE International Interconnect Technology Conf. / Advanced Metallization Conf. (IITC/AMC), San Jose, CA, May. 2016.

M. H. Nasr, C. E. Green, P. E. Kottke, X. Zhang, T. E. Sarvey, Y. K. Joshi, M. S. Bakir, A. G. Fedorov, "Extreme-microgap based hotspot thermal management with refrigerant flow boiling," in IEEE Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), Las Vegas, NV, May 2016.

R. Abbaspour, D. C. Woodrum, P. A. Kottke, T. E. Sarvey, C. E. Green, Y. K. Joshi, A. G. Fedorov, S. K. Sitaraman, and M. S. Bakir, "Combined finned microgap with dedicated extreme-microgap hotspot flow for high performance thermal management," in IEEE Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), Las Vegas, NV, May 2016.

X. Zhang,  M. H. Nasr, D. C. Woodrum, C. E. Green, P. A. Kottke, T. E. Sarvey, Y. K. Joshi, S. K. Sitaraman, A. G. Fedorov, and M. S. Bakir, "Design, microfabrication and thermal characterization of the hotspot cooler testbed for convective boiling experiments in extreme-micro-gap with integrated micropin-fins and heat Loss minimization," in IEEE Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), Las Vegas, NV, May 2016.

P. Asrar, X. Zhang, C. E. Green, P. A. Kottke, T. E. Sarvey, A. G. Fedorov, M. S. Bakir, Y. K. Joshi, "Flow visualization of two phase flow of R245fa in a microgap with integrated staggered pin fins," in Thermal Measurement, Modeling & Management Symposium (SEMI-THERM), San Jose, CA, Mar. 2016.

P. Asrar, X. Zhang, C. E. Green, P. A. Kottke, T. E. Sarvey, A. G. Fedorov, M. S. Bakir, and Y. K. Joshi, "Flow boiling of R245fa in a microgap with integrated staggered pin fins," in IEEE Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), Las Vegas, NV, May 2016.

X. Zhang, X. Han, T. E. Sarvey, C. E. Green, P. A. Kottke, A. G. Fedorov, Y. Joshi, and M. S. Bakir, "3D IC with embedded microfluidic cooling technology, thermal performance, and electrical implications," ASME Journal of Electronic Packaging, vol. 138, pp. 1-6, Mar. 2016.

Y. Zhang, Y. Zhang, T. E. Sarvey, C. Zhang, M. Zia, M. S. Bakir, "Thermal isolation using air gap and mechanically flexible interconnects for heterogeneous 3D ICs," IEEE Transaction on Components, Packaging and Manufacturing Technology, vol. 6. no. 1, pp. 31-39, Dec. 2015.

C. Green, P. Kottke, X. Han, C. Woodrum, T. E. Sarvey, P. Asrar, X. Zhang, Y. Joshi, A. Fedorov, S. Sitaraman, M. S. Bakir, "A review of two-phase forced cooling in three-dimensional stacked electronics: technology integration," ASME Journal of Electronic Packaging, vol 137, pp. 1-9, Dec. 2015.

T. E. Sarvey, Y. Zhang, L. Zheng, P. Thadesar, R. Gutala, C. Cheung, A. Rahman, M. S. Bakir, "Embedded cooling technologies for densely integrated electronic systems," in Proc. IEEE Custom Integrated Circuits Conf. (CICC), Oct. 2015. (invited)

C. E. Green, P. E. Kottke, T. E. Sarvey, A. G. Federov, Y. Joshi, M. S. Bakir, "Performance and integration implications of addressing localized hotspots through two approaches: clustering of micro pin-fins and dedicated microgap coolers," in Proc. Int. Tech. Conf. and Expo. Packaging and Integration of Electronic and Photonic Microsystems and Int. Conf. Nanochannels, Microchannels, and Minichannels (InterPACKICNMM), San Francisco, CA, July 2015.

. X. Zhang, X. Han, T. E. Sarvey, C. E. Green, P. A. Kottke, A. G. Fedorov, Y. Joshi, and M. S. Bakir, "3D IC with embedded microfluidic cooling: technology, thermal performance, and electrical implications," in Proc. Int. Tech. Conf. and Expo. Packaging and Integration of Electronic and Photonic Microsystems and Int. Conf. Nanochannels, Microchannels, and Minichannels (InterPACKICNMM), San Francisco, CA, July 2015.

D. C. Woodrum, T. Sarvey, M. S. Bakir and S. K. Sitaraman, "Reliability study of micro-pin fin array for on-chip cooling," in Proc. 65th IEEE Electronic Components and Technology Conf. (ECTC), San Diego, CA, May 2015.

C. Zhang, P. Thadesar, M. Zia, T. E. Sarvey, and M. S. Bakir, "Au-NiW mechanically flexible interconnects (MFIs) for rematable 3D integration," in Proc. IEEE Int. 3D Systems Integration Conf. (3DIC), Cork, Ireland, Dec. 2014.

Y. Zhang, T. E. Sarvey, and M. S. Bakir, "Thermal challenges for heterogeneous 3D ICs and opportunities for air gap thermal isolation," in Proc. IEEE Int. 3D Systems Integration Conf. (3DIC), Cork, Ireland, Dec. 2014.

T. E. Sarvey, Y. Zhang, Y. Zhang, H. Oh, and M. S. Bakir, "Thermal and electrical effects of staggered micropin-fin dimensions for cooling of 3D microsystems,"in IEEE Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), Orlando, FL, May 2014.